The Original Rainwater Pillow | 3000 Gallon

The Original Rainwater Pillow 3000 Gallon

The Original Rainwater Pillow 3000

The Original Rainwater Pillow is designed for the kind of short, heavy downpours we often experience. Three inch pipes allow massive amounts of water to be collected with minimal water waste.

Rainfall flows down your roof and into your gutters, where it is channeled through a filter into the Original Rainwater Pillow, which rests in your crawlspace or greenhouse, or under your porch or deck.

Two overflow outlets prevent over-filling. One can direct water to your garden or back to your downspouts. The other flows into a drain. The filter removes leaves and debris and can be painted with any exterior grade paint.

Every part of the system that can come in contact with your home’s interior is completely sealed; no moisture from The Original Rainwater Pillow will leak, evaporate or otherwise enter your home.

When you need outdoor water, simply connect a hose to the system and press the remote control button. The system’s 25 psi water pump will pump 10-12 gallons of water per minute – about the same pressure as most outdoor hose connections.

How big is The Original Rainwater Pillow?

The standard size Original Rainwater Pillow is 9 feet x 11 feet x 2.5 feet and holds about 1000 gallons. We can also custom manufacture larger pillows that can hold up to 40,000 gallons. Your Original Rainwater Pillow can custom made to fit the available open area in your crawl space or greenhouse, or under your deck or porch. When you measure your space, you must treat support pillars like walls, since The Original Rainwater Pillow cannot go around them. Additionally, the crawl space must be at least three feet high to accommodate the standard size pillow. Crawl space height for custom size pillows must be six inches higher then the inflated pillow height. Pillows can be made from 1 foot high to 3.5 feet high to custom fit your available space!